CirCut PCB VCut Depanelers/Separators
	- board separation without the stress

The Circut depaneler has been developed to separate/depanel v-cut scored, component-loaded PCBs cleanly and effortlessly. As surface mounted components continue to get smaller and more delicate, it is increasingly important to reduce distortion in the depaneling "breakout" process. This reduces scrap rates and "in the field" failures, which prove costly in terms of down-time, replacement and customer confidence.

one step separation & finishing depanels boards with components upto 70mm tall 1mm clearance required for separation small separator channel required* panels from 0.5 to 3mm thick depaneled effortlessly separates panels upto 700mm compensates for inconsistent web-thickness handles intermittant scoring edge conditioning to reduce fibres hardened and ground blades & guides can accept boards with component overhang* quick & simple setup manually operated or powered versions available * components can be adjacent to the score-line on one side of the blade and small components 1mm away on the other side, increasing to a maximum requirement of 3mm for tall components. *manually powered circut can be designed to accept component overhang

Reduced Component Failure Since there is no flex or distortion in the depaneling process, you can expect a significant reduction in post breakout board or component failure, therefore saving time and money. Flexibility in Scoring Depth The CirCut depaneler also allows more flexibility in scoring depth - thicker webs, which would formerly, have resulted in jagged breakout with loose fibres, are now separated/depaneled with a conditioned finished edge. One Step Separating and Finishing The Circut depaneler utilizes precision, hardened and ground separator blades with score-location guides which effortlessly slice the remaining web leaving board edges clean and smooth.

Thank-you for your interest in the Seetrax Circut depanelers/board separators. Prices start at £1,980-00 (pounds sterling) plus crating and carriage charges. We would be pleased to supply a full quotation upon request. Please contact us with any queries you may have.

CirCut PCB Depaneler/Separator

Used Equipment

Brochures

Contact us

Home

Seetrax CAE Ltd Woodstock, Hangersley Hill, Ringwood, Hampshire, England, BH24 3JP

Tel: + 44 (0)1425 489666

Fax: + 44 (0)1425 461641

Email: sales@seetrax.com